(CNN) — The launch team for the uncrewed Artemis I mission has recommended a “no go” for Saturday’s launch attempt after battling fueling issues. The team is awaiting the official word from the launch director on the status of the launch.
Shortly before 5 a.m. ET, mission managers received a weather briefing and decided to proceed with loading propellant into the rocket. The countdown clock resumed at 7:07 a.m. ET.
There was at least a 30-minute delay after a liquid hydrogen leak was detected at 7:15 a.m. ET in the quick disconnect cavity that feeds the rocket with hydrogen in the engine section of the core stage. It was a different leak than one that occurred ahead of the scrubbed launch on Monday.
The launch controllers warmed up the line in an attempt to get a tight seal and the flow of liquid hydrogen resumed before a leak reoccurred. They stopped the flow of liquid hydrogen and proceeded to “close the valve used to fill and drain it, then increase pressure on a ground transfer line using helium to try to reseal it,” according to NASA.
That troubleshooting plan was not successful. The team attempted the first plan again to warm up the line, but the leak reoccurred after they manually restarted the flow of liquid hydrogen.
The launch window opens at 2:17 p.m. ET and closes at 4:17 p.m. ET on Saturday. NASA’s live coverage began at 5:45 a.m. ET on its website and TV channel.
This process has put the team behind schedule, but it’s unclear how much of a delay it will cause in the countdown because they may be able to make up some time later.
Meanwhile, the core stage liquid oxygen tank is full and will be replenished as some of it boils off. Both propellants need to be filled within certain proportions to one another before launch. Liquid hydrogen is currently at 9% full.
There is a 60% chance of favorable weather conditions for the launch, with chances increasing to 80% favorable toward the end of the window, according to weather officer Melody Lovin.
The Artemis I stack, which includes the Space Launch System rocket and Orion spacecraft, sits on Launchpad 39B at Kennedy Space Center in Cape Canaveral, Florida.
The Artemis I mission is just the beginning of a program that will aim to return humans to the moon and eventually land crewed missions on Mars.
If the mission launches on Saturday, it will go on a journey around the moon and splashdown in the Pacific Ocean on October 11. There is still a backup opportunity for the Artemis I mission to launch on September 5 as well.
In the last few days, the launch team has taken time to address issues, like hydrogen leaks, that cropped up ahead of Monday’s planned launch before it was scrubbed. The team has also completed a risk assessment of an engine conditioning issue and a foam crack that also cropped up, according to NASA officials.
Both are considered to be acceptable risks heading into the launch countdown, according to Mike Sarafin, Artemis mission manager.
On Monday, a sensor on one of the rocket’s four RS-25 engines, identified as engine #3, reflected that the engine could not reach the proper temperature range required for the engine to start at liftoff.
The engines need to be thermally conditioned before super-cold propellant flows through them before liftoff. To prevent the engines from experiencing any temperature shocks, launch controllers gradually increase the pressure of the core stage liquid hydrogen tank in the hours before launch to send a small amount of liquid hydrogen to the engines. This is known as a “bleed.”
The team has since determined it was a bad sensor providing the reading — they plan to ignore the faulty sensor moving forward, according to John Blevins, Space Launch Systems chief engineer.
The bleed, originally expected to occur around 8 a.m. ET, is currently on hold.
This is a developing story; stay with 7NEWS on-air and online for the latest updates.
(Copyright (c) 2022 CNN. All Rights Reserved. This material may not be published, broadcast, rewritten, or redistributed.)